....
....
98% of smartphones announced in 2017 have been pre-installed with the Android 7.0 Nougat Operating System, OS, No wonder many of this phone manufacturers like Tecno and Infinix for MTK devices have rolled out the Android 7.0 OS to their existing smartphones, which included the likes of Tecno Camon CX.
....
98% of smartphones announced in 2017 have been pre-installed with the Android 7.0 Nougat Operating System, OS, No wonder many of this phone manufacturers like Tecno and Infinix for MTK devices have rolled out the Android 7.0 OS to their existing smartphones, which included the likes of Tecno Camon CX.
Since the Android 6.0 OS update, rooting has really been difficult, many users of Android phones have had issues being unable to root their Android phones on Android 6.0 OS, though some where successful and sone where not, like those that weren't successful, most of this phones crashed immediately and never came back on.
But thanks to Hovatek, most of these stubborn smartphones that were unable to be rooted or could crash were solved. Now to the post topic, but before then read below.
WARNING!!! By rooting your phone, you have decided to go with all risk or loss attached to it. Safaxnet will not be responsible for any loss or damage acquired during or when this process as shown below is carried out, Please be careful and wise while doing the rooting.
WARNING!!! By rooting your phone, you have decided to go with all risk or loss attached to it. Safaxnet will not be responsible for any loss or damage acquired during or when this process as shown below is carried out, Please be careful and wise while doing the rooting.
How To Tecno Camon CX On Android 7.0 Nougat OS
Some steps needs to be followed to root this device, also some required tools needed to be downloaded.
Required Tools For Rooting Tecno Camon CX Device:
- Download Tecno Camon CX TWRP click here
- Setup ADB and Fastboot on the PC using the guide Check here
- Extract and copy the Tecno Camon CX TWRP recovery.img into the same folder as the fastboot.exe and adb.exe
- Unlock your bootloader Tecno Camon CX Check here
- Download SuperSU.zip on your phone click here
How Can I Flash Using SP Flash Tool? See:- Step-By-Step Method To Flash Any MediaTek MTK Device Stock ROM
Required Tools For Rooting Tecno Camon CX Device:
- Download Tecno Camon CX TWRP click here
- Setup ADB and Fastboot on the PC using the guide Check here
- Extract and copy the Tecno Camon CX TWRP recovery.img into the same folder as the fastboot.exe and adb.exe
- Unlock your bootloader Tecno Camon CX Check here
- Download SuperSU.zip on your phone click here
How Can I Flash Using SP Flash Tool? See:- Step-By-Step Method To Flash Any MediaTek MTK Device Stock ROM
Step-By-Step Method To Root Any Tecno Camon CX Device
- Make sure your phone is well charged, at least 50% battery percentage is okay.
- When done with all the downloads/stuff above, now you can copy SuperSU.zip you downloaded earlier to both the phone’s & SD card storage.
- Connect the phone to the PC via USB cord while switched On and boot it into Fastboot (as instructed in the Bootloader unlock guide; don't forget to re-enable OEM unlocking and USB Debugging).
- When the phone enters Fastboot, load the TWRP / Philz recovery to the phone by typing the command below then pressing Enter
- The phone should automatically boot into TWRP / Philz recovery mode (depending on which you flashed) and do a full backup by tapping Backup (Recommended) then proceed with the guide once done.
- In TWRP, if you get a prompt asking you to swipe to allow modification of the System partition, tap KEEP READ ONLY.
- If the TWRP offers to root the phone, select NO
- In TWRP recovery, tap Install.
- Locate and select the SuperSU.zip file on your SD card and Swipe to confirm flashing of SuperSU.zip.
- Now wait till flashing is complete.
- When it signifies its completely flashed, reboot your phone normally
After the above steps, your Tecno Camon CX should now be rooted.
You can also confirm if your device has been rooted by downloading and installing a rooted checker application for yor device. Click Here to Download Root Checker
All credits to: Hovatek
- Make sure your phone is well charged, at least 50% battery percentage is okay.
- When done with all the downloads/stuff above, now you can copy SuperSU.zip you downloaded earlier to both the phone’s & SD card storage.
- Connect the phone to the PC via USB cord while switched On and boot it into Fastboot (as instructed in the Bootloader unlock guide; don't forget to re-enable OEM unlocking and USB Debugging).
- When the phone enters Fastboot, load the TWRP / Philz recovery to the phone by typing the command below then pressing Enter
- The phone should automatically boot into TWRP / Philz recovery mode (depending on which you flashed) and do a full backup by tapping Backup (Recommended) then proceed with the guide once done.
- In TWRP, if you get a prompt asking you to swipe to allow modification of the System partition, tap KEEP READ ONLY.
- If the TWRP offers to root the phone, select NO
- In TWRP recovery, tap Install.
- Locate and select the SuperSU.zip file on your SD card and Swipe to confirm flashing of SuperSU.zip.
- Now wait till flashing is complete.
- When it signifies its completely flashed, reboot your phone normally
You can also confirm if your device has been rooted by downloading and installing a rooted checker application for yor device. Click Here to Download Root Checker
All credits to: Hovatek
No comments:
Post a Comment
What do you think about the above post? Use the comment box to have your say!